Zeiss Axiolab 5 Manual Breve página 21

Axiolab 5
9.4 Functions of stands keys and display elements
For the location of the keys and display elements at your stand, refer to sections 9.1 to 9.3.
Key
On/off switch I/O
(see Fig. 1/28)
Permanent/
ECO switch
(see Fig. 1/12)
Indicator light
(see Fig. 1/10 and 11)
RL/TL button
(see Fig. 1/10 and 11)
Intensity/
LM knob
(see Fig. 1/9)
Left Snap button or
Right Snap button
(see Fig. 1/17)
(only if Axiocam 202 or
208 is attached)
Snap button +
Intensity/LM knob
* Short press means: hold less than 1 second, then release.
** Long press means: hold at least 1.5 seconds.
*** BLINK: the indicator light alternately goes on/off at 500 ms intervals
07/2018
ESSENTIAL OPERATION CONTROLS
Action Functionality/Description
I = on; O = off Switches the microscope on/off
Switches between Permanent (continuous) mode and ECO mode
of the microscope illumination:
- Permanent mode active: illumination is
Switch:
continuously switched on.
- ECO mode active: illumination switches off
after 15 minutes without action.
Blinking ***: Indicates whether microscope is working in TL or RL mode.
Switches RL/TL light source alternately on/off.
Short press *:
The respective indicator light is continuously illuminated.
Turn: Controls the light intensity of the active light source.
Light Manager function:
Long press **: Saves the light intensity; after saving is done, the LED switches
off for 300 ms (darkness indicates action to user).
Activates the factory default settings (enables/disables Light
Manager functionality).
Long press for
The indicator light starts blinking in
20 s:
reached. After 20 s, the indicator light turns to
continuously.
Snaps an image; after snap is finished, the monitor display
Short press *:
appears in BLACK for 50 ms.
Starts video recording; another short press is required to stop
Long press **: recording. After recording is finished, the monitor display
appears in BLACK for 300ms.
Enables/disables Light Manager (LM):
- Disabling: The indicator light blinks
Long press **: GREEN
- Enabling: The indicator light blinks
GREEN
430037-7014-111
/ ORANGE / GREEN in sequence.
/ GREEN / GREEN in sequence.
ZEISS
RED after 3 s until 20 s is
GREEN
19