Cleaning And Maintenance - cecotec GRANDHEAT 2500 Manual De Instrucciones

ENGLISH
A-7 200 ml
Soup
400 ml
A-8 550 g
Porridge
1100 g
Timer
To activate this function, the clock must be set first.
Select the desired cooking program. Two cooking stages can be set at most.
Note: The defrost mode cannot be set as one of the stages.
Example: Cooking 80 % with microwave for 7 minutes.
Press the Microwave button, the display will show "P100".
Press the Microwave button again or turn the knob to select 80 % microwave power.
Press the Start/+30sec/Confirm button to confirm. The display will show "P80".
Turn the knob to set the desired cooking time: "7.00".
Once this steps are do not press Start/+30sec/Confirm.
Press the Clock/Timer button, the hour figures will blink.
Turn the knob to set the desired hour, within 0-23.
Press the Clock/Timer button to confirm. The minutes figures will flash.
Turn the knob to set the desired minutes, within 0-59.
Press the Start/+30sec/Confirm button to complete the configuration.
If the door is closed, the device will beep twice when the scheduled time arrives and the
cooking program will start automatically.
If the door is open, the device will beep and the program will be automatically cancelled.
Multi-sequence cooking
A maximum of 2 sequences can be set for a cooking process. If one of the sequences included
is defrosting, it should be set as the first one.
Example: Defrost food for 5 minutes, then cook with 80 % microwave power for 7 minutes.
Press the Weight/Time defrost button, the display will show "dEF2.".
Turn the knob to set 5 minutes of defrost time, "5:00".
Press the Microwave button once, the screen will display "P100".
Press the Microwave button again or turn the knob to select 80 % microwave power.
Press the Start/+30sec/Confirm button to confirm. The screen will display "P80".
Turn the knob to adjust the cooking time to 7 minutes. The screen will display "7:00".
Press the Start/+30sec/Confirm button to start cooking.
The device will beep each time a sequence is completed. When the whole process is
completed, the device will beep 5 times.
70 GRANDHEAT 2500 BUILT-IN STEEL BLACK
200
400
550
1100
Checking settings
During operation, press the Microwave button, the current power level will be displayed for 3
seconds.
During operation, press the Clock/Timer button, the current time will be displayed for 3
seconds.
Child lock system
In standby mode, press the Stop/Clear for 3 seconds. The device will emit a long beep
indicating this function has been activated.
The current time will be displayed if the clock is set. The following button will also be
displayed:
Fig. 12.
In standby mode, press the Stop/Clear for 3 seconds. The device will emit a long beep
indicating this function has been deactivated.

5. CLEANING AND MAINTENANCE

The device, as well as food rests, must be cleaned and removed regularly.
Unplug the cable from the power supply before starting the cleaning. Do not immerse the
product in water or any other fluid during cleaning.
The lack of maintenance and cleaning of the product may cause a deterioration on its surface
and affect its lifespan.
Do not use strong detergents, powder abrasives or metal brushes to clean the device.
Do not remove the mica plate.
When the microwave has been used for a long time, some strong odours may arise from inside.
In order to get rid of them, follow one of the steps below:
Place several lemon slices in a cup and heat them at high power for 2 or 3 minutes.
Place a cup of red tea inside the microwaves and heat it at high power for 2 or 3 minutes.
Place orange peels inside the microwaves and heat it at high power for 1 minute.
Use a dampened soft cloth to clean enclosures, door, interior walls and the door frame.
Warning: All maintenance tasks must be strictly carried out by qualified technical personnel.
ENGLISH
GRANDHEAT 2500 BUILT-IN STEEL BLACK 71