Package Contents; Assembly And Adjustments - DeWalt DWH050 Traducido De Las Instrucciones Originales

EN GLI SH
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Dust Extraction System
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed on the main information
label.
Example:
2011 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Drilling dust extraction system
1 Drilling head (fits drill bit diameters 0–38 mm)
1 Drilling head (fits drill bit diameters 38–52 mm)
2 Hole cleaning nozzles
1 Kitbox
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Hole cleaning nozzle (8–14 mm)
b. Hole cleaning nozzle (14 mm and above)
22
c. Connection point
d. Dust extraction system
e. Quick release buttons
f. Drilling head release button
g. Drilling head (fits drill bit diameters 0–38 mm)
h. Drilling head (fits drill bit diameters 38–52 mm)
i. Suction pad
INTENDED USE
Your drilling dust extraction system has been
designed for professional drilling applications in
concrete and masonry. Using the appropriate
hammer drill, drill bit and dust extractor it can be
used to remove the vast majority of static and
airborne dust which without the use of the dust
extraction system could otherwise contaminate the
working environment or pose an increased health
risk to the operator and those in close proximity.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
The drilling dust extraction system is a professional
power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing set-
ups or when making repairs. Be sure
the trigger switch is in the OFF position.
An accidental start-up can cause injury.
Attach Drilling Head to Dust
Extraction System (fi g. 1, 2)
1. Select drilling head (g, h) to be used.
2. Slide drilling head (g, h) into dust extraction
system (d) until it locks into place.
Remove Drilling Head from Dust
Extraction System (fi g. 1, 2)
Depress drilling head release button (f) to remove
drilling head (g, h) from dust extraction system (d).