Publicidad
Idiomas disponibles
Idiomas disponibles
6. Switch door catch, bezel, and plug
Remove the door catch, bezel, and plug from the inside of the
inner door by squeezing and pulling/pushing them. Place the door
catch, bezel, and plug on the sides opposite from where they
were.
7. Rotate outer door
Rotate outer door 180º and set it back down on inner door.
Reattach outer door panel to inner door panel so handle is on the
side where hinges were just removed. Insert 4 door screws.
8. Flip door over
Flip door over so handle side is down.
9. Attach door hinges
Reattach door hinges to dryer door so that the larger hole is at the
bottom of the hinge.
10. Remove door strike and door strike plug
Remove door strike and door strike plug from dryer cabinet. Insert
the door strike into door strike plug hole and secure with screw.
Insert door strike plug into original door strike hole and secure
with screw.
11. Remove and transfer hinge hole plugs or
covers
Use a small, flat-blade screwdriver to gently remove 4 hinge hole
plugs or covers on left side of dryer cabinet. Transfer plugs or
covers into hinge holes on right side of dryer cabinet.
2
Publicidad
