Elma CFD190 Manual Del Usuario página 10

6. Push the sliding carriage slowly towards the blade that is rotating. An even
slice forms as the food slides along.
7. Once the carriage reaches the end, slide it back. Repeat steps 5 and 6 until
you get the food slices you need.
8. Once you have finished using the meat slicer:
-Stop the motor selecting the switch 0 position.
-Push the carriage towards the start of the travel.
-Unplug the appliance to prevent it from starting unexpectedly.
-Pick the slices.
-Clean the appliance following the instructions in section 04. Cleaning.
wARNINg
Don't use the meat slicer continuously for more than 5 minutes. When you use
it longer, the motor stops automatically to prevent overheating. When the motor
stops automatically, you should wait 30 minutes before switching it back on.
3.1. Household meat slicer assembly
The prouct you have adquired consists of the following parts:
1. ON/OFF switch
2. Blade guard
3. Sliding guide
4. Security bolt
5. Base
6. Food pusher
7. Sliding carriage
8. Gauge plate
9. Rotating blade
10. Slice thickness knob
10