GE CDT 725 Serie Manual Del Propietário página 21

Ocultar thumbs Ver también para CDT 725 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The 3rd rack is also removable to allow extra large items to be placed in the upper rack:
To remove the 2-tray 3rd rack:
1
Remove silverware tray - see previous
page.
To remove the 1-tray 3rd rack:
2
Push the rack all the way to one side so that
a gap between it and the side rail forms on
the other side. Align the side rail posts with
the center of the clips on the rack and lift
straight up.
Rail posts
on inside
of rails
Rack
clips
Rack
Rail
Push rack to
one side
Rail post
will slide
in or out
of this
opening
3
Continuing to hold the rack in the lifted
position, repeat on the other side.
4
Once the rack is removed, push the side
rails all the way back into the dishwasher.
1
With the rack fully extended, lift the front of the
rack so that the rack roller wheels clear the
retaining hook.
2
Continue to pull the rack until the remaining rack
roller wheels clear the retaining hook.
3
Replace the rack by aligning the rack roller
wheels on the retaining hook and rack rails –
Ensure all roller wheels are located on top of the
rack rails.
GEAppliances.com
Align rail posts with
rack clips - Pull rack up
Rail
post
Rack
Rail
clip
21

Publicidad

Tabla de contenido
loading

Tabla de contenido