CArE AND CLEANING
replacing the Oven Light
CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light.
replacing the oven interior light bulb:
The interior oven light is located at the rear of the
oven cavity and covered with a glass shield. The
glass shield must be in place whenever the oven
is in use (Figure 21).
1. Turn electrical power off at the main source or
unplug the appliance.
2. Remove the interior oven light shield after
removing the wire holder by carefully moving
the wire to the side of the glass shield. The
tension from the wire holds the glass shield in
place.
3. Pull the shield straight out. Do not twist or
turn.
4. Replace the bulb with a new appliance bulb.
5. Replace the glass oven light shield. Replace
wire holder.
6. Turn the power back on again at the main
source (or plug the appliance back in).
7. Be sure to reset the time of day on the clock.
oven
light
Figure 21: Oven light protected by glass shield
26
removing the Storage Drawer
Use the storage drawer for storing cooking utensils.
The drawer can be removed to facilitate cleaning
under the range. Use care when handling the
drawer.
Figure 22: Open storage drawer
Figure 23: Closed storage drawer
EN