Samsung 4+ Serie Manual De Usuario página 25

Ocultar thumbs Ver también para 4+ Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Issues
The cable/set top box remote control
doesn't turn the TV on or off, or adjust the
volume.
A "Mode Not Supported" message
appears.
Caption on TV menu is greyed out.
There is a plastic smell from the TV.
The TV is tilted to the side.
The channel menu is greyed out
(unavailable).
Your settings are lost after 30 minutes or
every time the TV is turned off.
You have intermittent loss of audio or
video.
You see small particles when you look
closely at the edge of the frame of the TV.
POP (TV's internal banner ad) appears on
the screen.
Some of above pictures and functions are available at specific models only.
All manuals and user guides at all-guides.com
Solutions and Explanations
Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
SAMSUNG TV code.
Check the supported resolution of the TV, and adjust the external device's output resolution
accordingly. Refer to the resolution settings on page 10 of this manual.
Caption can not be selected in the TV menu when connected via HDMI or Component (p. 16).
Caption must be activated on the external device (p. 16).
This smell is normal and will dissipate over time.
Remove the base stand from the TV and reassemble it.
The Channel menu is only available when the TV source is selected.
If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
SOURCE
button to select TV mode, and go to
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
This is part of the product's design and is not a defect.
Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 7).
→ Setup → Plug & Play → ENTERE (p. 7).
MENU
English
25

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

430 seriePl42c430Pl50c430

Tabla de contenido