Tripp-Lite SNMPWEBCARD Manual De Instalación página 10

Features
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
A
environmental sensor to provide remote temperature/humidity monitoring
and a dry contact interface to control and monitor alarm, security and
telecom devices. Contact Tripp Lite Customer Support at (773) 869-1234
for ordering information. Note: Do not connect a keyboard or mouse to this
port.
Mini-DIN Serial Port: Use this port to provide a direct terminal connection
B
to a computer with a terminal emulation program. A serial cable (part
number
73-1025) is included with the SNMPWEBCARD. If you need to order a
replacement cable, contact Tripp Lite Customer Support at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the SNMPWEBCARD to
C
the network with a standard Ethernet patch cable. The Link LED
Status LED
below. Does not support PoE (Power Over Ethernet) applications.
SNMPWEBCARD Operating Conditions
Link LED Color
C1
Off
Flashing Amber
Flashing Green
Status LED Color
C2
Off
Steady Green
Flashing Amber
200907010 93-2916.indb 10
indicate several operating conditions, as shown in the table
C2
A B
C
C1
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
10
and
C1
C2
10/8/2009 5:16:39 PM