Tripp-Lite SNMPWEBCARD Manual De Instalación página 2

Installation
Warning: When handling the SNMPWEBCARD, follow standard ESD
(electrostatic discharge) precautions to avoid damaging the card. For your
safety, you should also read the documentation that came with your UPS system
or PDU to familiarize yourself with precautions against electric shock.
The SNMPWEBCARD allows users to operate any compatible Tripp Lite UPS
System or network-enabled PDU as a managed device on the network, accessible
via Web browser, Network Management Station or telnet. This manual refers to
installing the card in a UPS system, but the same instructions apply to installing
the card in a compatible PDU.
1 - Preparation
Confirm Package Contents: In addition to this manual, your package
1-1
should include the accessory card in an anti-static bag, a configuration cable
(73-1025), several faceplates and a CD-ROM containing additional
documentation and Management Information Base (MIB) files for use with
Network Management Systems (not otherwise required). If anything is
missing, contact your supplier immediately.
Install UPS: Install your UPS system and turn it on before installing the
1-2
SNMPWEBCARD. Ensure that the accessory card slot is accessible.
Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is
1-3
printed in two locations: a label attached to the underside of the card and a
duplicate label inside the box. Attach the duplicate label to the UPS system
or keep it in a secure location for easy reference.
Determine Installation Method: If your network's DHCP server will
1-4
assign a dynamic IP address to the SNMPWEBCARD automatically,
proceed to 2 - Dynamic IP Address Assignment. If you will assign a static
IP address to the SNMPWEBCARD manually, proceed to 3 - Static IP
Address Assignment. If you are uncertain which method to use, contact
your network administrator for assistance before continuing the installation
process.
200907010 93-2916.indb 2
2
10/8/2009 5:16:36 PM