Publicidad
Idiomas disponibles
Idiomas disponibles
Concrete Installation
Reinforcing Rods
Concrete
(By Contractor)
N
ote:
Use appropriate
water tight conduit
(not included)
Figure 8.
Create an area around fixture to prevent foliage or
N
ote:
debris from interfering with light output.
Soil Installation
Soil or Concrete
N
ote:
Use appropriate
water tight conduit
(not included)
Figure 9.
Gravel or Sand
Backfill
N
ote:
Use Gray duct sealing
compound to seal
around conduit entry
(not included)
Gravel Backfill
N
ote:
Use Gray duct sealing
compound to seal
around conduit entry
(not included)
COOPER LIGHTING SOLUTIONS
Installation Instructions – Monaco 3000
Midgrade Installation
Soil
Use appropriate
N
ote:
water tight conduit
(not included)
Figure 10.
For Midgrade Installation Up To 5" Above Grade, It is
Recommended to Create A Soil or Concrete Base to
Stabilize Fixture
Internal Components and Wiring
5. Ballast/Driver Install
Ensure Wiring is Routed
as Shown After
Connections are Made.
Figure 11.
IB526101EN
Gravel Backfill
5"
N
ote:
Use Gray duct sealing
compound to seal
around conduit entry
(not included)
Electronic Ballast
LED Driver
Magnetic Ballast
Ballast Should Sit Flush to
Bottom of Bucket Oriented
as Shown.
Installation instructions
5
Publicidad
