Cooper Lighting Lumiere Monaco 3000 Instrucciones De Instalación página 6

Installation Instructions – Monaco 3000
6. Install Lamp Housing
Rest on Ledge
Figure 12.
7. Install Lamp Housing
3/16 Hex Head
Figure 13.
6
COOPER LIGHTING SOLUTIONS
Red
Blue
Green
From Driver/Ballast
For Incandescent: Directly Connect
Lamp Housing to Wire.
Adjust By Hand Only No Power
!
Tools
25° Max. Tilt
Position Locking Set Screw
IB526101EN Installation instructions
8. Insert Accessory Lens or TRL Options
TRL3
Ground
Figure 14.
Trim Ring and Accessories
9. Install Glass/Trim Ring
1/8" Hex Head (Do Not Overtighten
25-30 in/lbs max.)
Ensure All Mounting
N ote:
Holes and Sealing
Surfaces are Clear
of Debris Before
Installing Gasket/
Glass
Figure 15.
Snap Ring Lamp Housing
TRL or
Accessory
Lens
Snap Ring
Max. of 3
Lens
Accesories
Only. (This
Includes
TRL if
Requested)
Trim Ring
Glass
Gasket
Bucket
Ensure Lamp Housing is
Seated Properly
Before Installing
Gasket/Glass