Ravelli Chronos Manual De Operación Y Mantenimiento página 66

Rev.1 12/12/2019
Page 66
Remove packaging
Check that the built-in chimney is not damaged before installing it.
Scan 1003/1004 is delivered secured to the pallet. It is recommended that you remove the door and take all loose parts out of the
combustion chamber before unscrewing the chimney from the pallet; this will facilitate the mounting of the insert.
Dismount the combustion air box. This box is only needed, if the insert is to be connected with external air supply, see page 19.
1
To remove the door:
Loosen the pointed screw,
remove the screw and the
spring and lift off the door
Remove packaging
Dismount the connecting piece: Remove the baffle plate from the chimney before the connecting piece is removed. Loosen (not
dismount) the flange nuts holding the connecting piece inside the chimney. Push the connecting piece in the direction of the arrow
and remove it.
NAVN:
Lift the insert free from the grip holes in the front and pull it out of the cassette
MATERIALE:
DIMENSION:
STI:
2
Scan 1001
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001003.idw
STI:
Use and maintenance manual Chronos, Zeus, Ercole e Ermes
Combustion air box
Scan 1001
Baffle plate
C:\Working Folder\Designs\Scan 1001\91001003.idw
Afmontage låge
N/A
VÆGT:
N/A
AREAL:
Scan 1003 Brændkammerforing, eksploderet
NAVN: EMNE:
MATERIALE: VÆGT:
N/A
DIMENSION: AREAL:
C:\Working Folder\Designs\Scan 1003\91003003.idw
STI:
Afmontage låge
EMNE:
3
TG.NR: 91001003
28-03-12 BC
DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: 91003003
N/A KEN
DATO: 12-10-2018 SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Scan 1001 Frisklufttilførsel bund af ovn
NAVN: EMNE:
MATERIALE:
DIMENSION:
VÆGT:
N/A
AREAL:
4 x self-tapping screws 4.2 x
TG.NR:
N/A 07-05-2012
VÆGT: DATO:
N/A
AREAL:
Krog Iversen & Co A/S
Screw
and
spring
Pointed screw
N/A 2
DATO:
Krog
DK-5
91001032
BC
SIGN: