Customer Service - Klein Tools ET180 Manual De Instrucciones

ENGLISH
When the Low Battery Indicator
replaced.
1. Loosen screw
2. Remove and recycle 3 spent AAA batteries.
3. Install 3 new AAA batteries, noting proper polarity.
4. Replace battery door and tighten screw securely.
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when the tester is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the tester to
return to normal operating conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com
6
BATTERY REPLACEMENT
D
and remove battery door
12
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
is blinking, the batteries must be
11
www.kleintools.com
.