Philips NORELCO 6940LC Manual Del Usuario página 14

ENGLISH
14
_6940LC_6900LC.indd 14
C
Press the Razor Head Release Button (1)
2
and remove Razor Head Assembly from
the razor unit (2).
C
Brush the inside of the razor housing.
3
Turn Razor Head Assembly over so that
4
underside is exposed.
C
Turn wheel of frame counterclockwise.
5
Remove the frame and brush clean.
6
C
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
Separate the cutter from the comb.
8
C
9 Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
8/12/09 10:00:36 AM