Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0000
30-0005
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1065
ITEM
QTY
1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
1/2-13 X 2.00" HEX HEAD BOLT
5
2
1/2" FLAT WASHER
6
2
1/2" LOCK WASHER
7
4
M10-1.50 X 30MM HEX HEAD BOLT
8
4
10MM FLAT WASHER
9
4
10MM LOCK WASHER
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE (2) Y CONDUCTOR (3)
4
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
5
2
ARANDELAS PLANAS SAE DE 1/2"
6
2
ARANDELAS DE PRESIÓN DE 1/2"
7
4
M10-1.55 X 30MM HEX HEAD BOLT
8
4
ARANDELAS PLANAS DE 10 MM
9
4
ARANDELAS DE PRESIÓN DE 10MM
1
1
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE
SEPAREMENT)
2,3
2
SUPPORTS, PASSAGER
4
2
BOULON A TETE HEXAGONALE DE 1/2 -13 X 2,00 PO
5
2
RONDELLE PLATE 1/2 PO
6
2
RONDELLE A FREIM DE 1/2 PO
7
4
BOULONS A TETE HEXAGONALE M10 1,50 X 30MM
8
4
RONDELLE PLATE 10MM
9
4
RONDELLE FREIN 10MM
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
STEP 1.
completely before beginning.
Remove two 10MM bumper brace bolts located on back side of front body mount. SEE FIGURE 1.
STEP 2.
NOTE: If bumper brace bolts are not present, proceed to Step 4.
Determine passenger and driver brackets. SEE FIGURE 2. Attach brackets to back side of body mount
STEP 3.
using 10mm bolts previously removed. NOTE: Vehicles without existing bolts use 10mm fasteners pro-
vided. SEE FIGURE 1. Hand tighten.
Attach Safari Bar using 1/2" fasteners. Hand tighten. SEE FIGURE 1.
STEP 4.
Level and adjust Safari Bar as desired and tighten all fasteners. Recommended torque values are 64 Ft.
STEP 5.
Lbs. for 1/2" fasteners and 32 Ft. Lbs. for 10MM fasteners.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive
wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish
and open it to corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION:
1998-2001 OLDSMOBILE BRAVADA; 1998-2002 GMC JIMMY;
1998-2003 ISUZU HOMBRE; 1998-2004 CHEVY BLAZER/S-SERIES PICKUP
APLICACIÓN:
OLDSMOBILE BRAVADA, MOD. 1998-2001 GMC JIMMY, MOD. 1998-2002
ISUZU HOMBRE, MOD. 1998-2003
CHEVROLET BLAZER
APPLICATION:
OLDSMOBILE BRAVADA 1998-2001; GMC JIMMY 1998-2002
ISUZU HOMBRE 1998-03;
CONTENTS - CONTENIDO - CONTENU
(2)
ET CONDUCTEUR
;
/S-SERIES PICKUP, MOD. 1998-2004
CHEVY BLAZER/S-SERIES PICKUP 1998-2004
(3)
WO:
TOOLS - HERRAMIENTA - OUTILS
3/4" SOCKET
15MM SOCKET
17MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4"
DADO DE 15MM
DADO 17MM
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
DOUILLE 15MM
DOUILLE 17MM
MANERAL
CLE DE COUPLE
75-0200 REVISION D 11/21/07
Publicidad
Manuales relacionados para Westin 30-0000
Resumen de contenidos para Westin 30-0000
- Página 1 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 2 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible,...
- Página 3 FIGURA 2 VISTA LATERAL FIGURA 2 VISTA LATERAL FIGURE 2 VUE LATERALE FIGURE 2 VUE LATERALE Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706...