• When requested by the app, press and hold the Timer button
4 seconds).
EN
EN
(C1) will blink for a maximum of 30 seconds, while the i-Companion xl
The connection indicator
connects to your smartphone/tablet.
• Accept the pairing request displayed on your smartphone/tablet or access the notification centre to accept
the pairing.
When the connection indicator (C1) is constantly lit it indicates that the connection has been
established.
NB : When the pairing has been carried out, i-Companion xl will automatically recognise your
smartphone/tablet when you next connect. You will not have to carry out this pairing step again.
The connection has been successful
Your i-Companion xl is now connected to your smartphone/tablet. The icon above shows you that the
connection has been established.
131
(B3) on the i-Companion xl (for
131
The connection has failed
The icon above shows you that the connection has not been established.
Please repeat the following operations:
• Move close to i-Companion xl.
• Check that i-Companion xl is properly plugged into the socket and that the plug is working properly.
• Check that your smartphone/tablet is compatible (see compatibility list at www.moulinex.com).
• Check that Bluetooth is activated on your smartphone/tablet.
• Start the pairing steps again, and consult the FAQs (frequently asked questions).
If there is still a problem, make sure that your smartphone/tablet is compatible
If you are using an Android device, make sure that it is one of the compatible models (see compatibility
list at www.moulinex.com).
• Access the app menu to see our range of recipes.
In connected mode, during a step-by-step recipe, the
first reset ends the step, and the second reset ends
the recipe.
FAQs: FREQUENTLY ASKED QUESTIONS
Where should I put i-Companion xl?
• Put i-Companion xl on a flat, stable, heat resistant work surface.
• For the best connection between i-Companion xl and your smartphone/tablet, we recommend you make
any changes required to ensure the connection is at a reasonable distance.
• If the connection indicator (C1) is constantly lit, this shows that your devices are connected.
• If the connection is lost (the connection symbol is shown crossed out), move closer to i-Companion xl to
re-establish the connection.
What happens if the connection is lost during a recipe?
If the connection between i-Companion xl and your smartphone/tablet is lost during a recipe, the two
devices will be automatically synchronised as soon as the connection is re-established. You will be able to
carry on with your recipe from the step you were on when the connection was lost.
Can I use i-Companion xl without the app?
Your appliance may be used without the app. (See first use in unconnected mode).
For this, please refer to the 'use of the appliance' paragraph.
However, only the app will enable you to benefit from the many advantages of the connected product.
Can i-Companion xl be used with more than one smartphone or tablet?
If you wish, you can pair several devices with i-Companion xl. To do this, pair each device separately. (See
pairing).
However, only one device may be connected at a time.
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
132
132
EN
EN