Technical Data - oneConcept 10031706 Manual Del Usuario

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure
caused by ignoring the items and cautions mentioned in the operation and installation
instructions are not covered by our warranty and any liability.
Item number
Power supply
Power consumption
Protections class
• Read all instructions carefully before using.
• Make sure use the rated voltage 230V~.
• Do not operate this appliance if the cable or plug becomes damaged.
• Keep the appliance and cable away from sources of heat, sharp objects or anything that
may cause damage.
• Repair malfunction machine or damaged cable only by authorized service representative.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
• Ensure the appliance is switched OFF before connecting to the mains power supply.
• Switch off the power supply and unplug from the mains socket when not in use, before
cleaning or changing accessories.
• Do not install the heater right below a socket.
• To prevent overload and blown fuses, do not plug other appliance into same outlet (re-
ceptacle).
• Put the cord away from traffic areas so that it will not be tripped over.
• Indoor use only.
• NEVER use this heater where it may come into contact with water i.e. bathroom, shower
room, kitchen.
• Never leave the appliance unattended when connected to the mains power supply.

Technical Data

10031706
230V~ 50/60Hz
600 W
I
Sicherheitshinweise
10031707
230V~ 50/60Hz
800 W
I
10031708
10031709
230V~ 50/60Hz
1000 W
I
9