Junghans J644.83 Manual Del Usario página 5

Instructions for use
Important information for models with screw winders.
In order to be able to perform the winder's functions, proceed as
follows:
Open: Press the winder towards the case and, by turning it to the left,
unscrew it. You can then make any settings you wish to make.
Close: Press the winder towards the case as far as it will go. Then screw
it closed by turning it to the right.
18
Features and functions
1
Setting the time
Pull the winder into position B. That stops the watch movement.
You can now position the minute hand precisely in line with the
relevant minute marker and set the desired time. Press the winder
back into position A to start.
1 Hour hand
2 Minute hand
2
3 Winder
3
A B
19