Connecting The Pdu - Tripp-Lite PDUMNH20HV Manual Del Usario

3. Installation
3.1-7 Cord Retention Shelf
Attachment (Optional): Use
included screws to attach the
cord retention shelf/shelves to the
bottom of the front panel of the
1U model or to the top and bottom
of the front panel of the PDU (2U
models) as shown.
3.1-8
Cord Retention (Optional): If
you attached the cord retention
shelves, use them to secure the
equipment power cords. Attach
each cord to the shelf by looping
the cord and securing it to an
attachment point with one of the
included cable ties. Make sure
that each cord can be unplugged
from the PDU without removing the
cable tie.

3.2 Connecting the PDU

3.2-1
Plug the PDU Into a Compatible
AC Outlet: 208/230V for
PDUMNH20HV, 208/240V
for PDUMNH30HV, 230V for
PDUMNH32HV.
201110150-93-3050.indb 9
3.1-7
PDUMNH20HV
3.1-7
PDUMNH30HV & PDUMNH32HV
3.1-8
PDUMNH30HV
3.2-1 Your model may vary.
9
11/9/2011 11:13:12 AM