Radio Mode - auna KR-140 DAB Manual Del Usuario

Factory Reset
• Choose "Factory Reset" > choose "Yes" to reset the device and all
changed settings back to factory default. Choose "No" to abort.
• The device will reset and restarting when "Yes" is chosen and
confirmed.
Software Version
Choose "SW version" to view the information of the software / firmware
version when you need.

RADIO MODE

Note: This device has design support FM-RDS function, it support PI, RT,
PS, PTY and CT of RDS, then the Clock's time and date can be sync and
adjusted automatically in background when the FM station has RDS-CT
signal transmitting.
Start FM mode
• In power On mode short press "MODE" button to switch FM mode if it
is not the in position.
• The "FM Mode" will show in the display for few seconds, and then
switch to now receiving interface screen for use.
Adjust volume level
Rotates the "Adjustment (16)" button to [+] or [-] for decreases or increases
the volume. When rotating the button, a progress bar of volume appearing
for in LCD display.
FM mute
• Short press the "AMS (12)" button, the sound will mute and the "Mute"
word will display, for 3 seconds as identify, in LCD display.
• Short press the "AMS (12)" button to resume and the "Mute Off" word
will display, for 3 seconds as identify, in LCD display.
EN
37