Programming With The Easy Base Unit; Configuration Parameters (Easy) - Gewiss CHORUS GW 10 767 Manual Del Usuario

PROGRAMMING WITH THE EASY BASE UNIT

5.
5.1
After creating the required function the actuator's operating parameters
can be set from the "Application → Parameters" menu.
The parameters available, in relation to the function created, are listed
in the following table.
The underlined value is the default value.
Function: For all functions
Parameter: Operation mode
shutters
blinds
Function: alarm
Parameter: Alarm mode
No alarm
Alarm pos.: DOWN
Alarm pos.: UP

CONFIGURATION PARAMETERS (EASY)

Handling of Shutters
Handling of blinds and regulation of laths
Alarm signal ignored
Complete raising of the shutters
Complete closure of the shutters
22