Trevi ME 3165 RC Manual Del Usuario página 4

ME 3165 RC
DESCRIPTION OF CONTROL
1. Time display
2. Icons weather forecast
3. Channel external sensor
4. Indoor temperature / humidity
5. Outdoor temperature / humidity external sensor
6. Calendar
7. Tendency temperature
8. Alarm Clock icons 1 and 2
9. SNOOZE button
10. MEM button
11. SET button
12. ALARM button
13. UP button
14. DOWN button
15. Battery Compartment 3xAAA (batteries not included)
16. External power supply socket
17. TX channel selector, select external sensor channel
18. TX Button
19. Compartment 2xAA batteries (batteries not included)
20. Pedestal
21. Symbol Radio Control RCC
POWER METEO STATION
Open the battery compartment (15) on the back of the unit and insert three "AAA" cell batteries according to polarity.
Insert the external power in the socket (16), insert the adapter into a wall outlet.
POWER SENSOR EXTERNAL
Open the battery compartment (19) on the rear, and insert two "AA" size batteries matching the polarities.
SETTING THE EXTERNAL SENSOR
This weather station is arranged to communicate with three external sensors. One of these comes with the unit, the remai-
ning two are optional.
1. Power the weather station as described in POWER METEO STATION.
2. Insert the batteries in the external sensor, set the selector (17) to the desired transmission channel (1, 2 or 3). Automatic
weather station data to be transmitted.
3. Press the UP button (13) more times to select the channel set on the external sensor. Sequentially selects the channel 1,
channel 2, channel 3 or sequential display of 3 channels (icon flashing channel). In case of non receipt of the display
signal it is shown the character -.
Notes: Place the weather station away from equipment that generates magnetic fields such as mobile phones, televisions etc ....
TIME DISPLAY THROUGH RADIO CONTROL
This device is equipped with a receiver able to receive the time signal of the Physikalisch Technische Bundesanstalt Braun-
schweig (central Germany) admissible in a 1500 km radius.
1. Press and hold the DOWN button (14) of the weather station, the symbol (21) will flash radio control and within 24 hours
will be displayed on the control radio time signal.
Note 1: When the symbol of the blinking control radio is displayed you can not make any manual adjustments.
Note 2: When the symbol is steady it means that the signal 'was properly received.
Note3: The time is transmitted from the central Germany, so if we are in a country with different time than the Germany is
necessary to set the time zone.
Note4: Place the weather station away from equipment that generates magnetic fields such as mobile phones, televisions etc ....
It not in all areas of Europe may be able to receive the signal of the radio control. In this case you must set the time manually.
SETTING THE CLOCK MANUAL
1. Press and hold the SET button (11) to enter the manual clock setting.
2. Set the time zone of your region through the UP (13) or DOWN (14). You can choose between -1, 0, +1 (UTC correction)
4
English