Krups GVX2 Manual De Instrucciones página 32

Ocultar thumbs Ver también para GVX2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Advice to select the number of cups:
- Use the number of cups selector (8) to
program the quantity of ground coffee
you want.
- The more cups you select, the longer
the appliance will run.
Maintenance
- Always unplug your appliance before
cleaning.
- Never place the body of the appliance,
power supply cord or plug in water or
under running water
- Do not use detergents or abrasive pads
to clean the appliance.
- Clean the lids and the ground coffee
holder in warm, soapy water or place
them in the upper basket of your dish-
washer.
- Over time colour from the coffee beans
may stain the plastic parts of your
appliance, this is normal. They may be
cleaned by soaking them in mild bleach
(non abrasive) straight after use.
- To remove the removable upper mill
(5), set the grind selector (9) to the
minimum position then take hold of the
side flaps of the upper mill with your
fingers and turn clockwise, then raise it
vertically to remove (Fig. A)
- Carefully clean the inside of the bean
hopper (1) using a damp cloth.
- To replace the upper mill, set the grind
selector (9) to the maximum position,
position the removable upper mill and
turn it round once in the anticlockwise
direction (Fig. A)
- Carefully clean the ground coffee
dispenser and the body of the applian-
ce using a damp cloth
Troubleshooting
The
appliance
does not
operate or
stops during
operation.
The grind
selector no
longer works.
Disposal Advice
To care for the environment, please
dispose of your appliance at your local
waste disposal centre.
HELPLINE:
If you have any product problems or
queries, please contact our Customer
Relations Team first for expert help and
advice:
0845 602 1454 - UK
(01) 4751947
or consult our website -
www.krups.co.uk
29
Check the electrical
connection
The bean hopper is
not positioned cor-
rectly.
The ground coffee
holder or its lid are
not positioned cor-
rectly or not fitted.
Check that the
upper mill is
correctly positioned.
(See paragraph on
maintenance in the
userʼs manual)
- Ireland

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gvx1

Tabla de contenido