Before first use
Clean the ground coffee holder (6), its lid
(7) and the bean hopper lid (2) with
warm, soapy water. Clean the inside of
the bean hopper (1) with a damp cloth.
Never place the body of the appliance in
water or under running water. Carefully
dry the assembly of parts and fit them to
the appliance again. You can wash the
ground coffee holder, its lid and the bean
hopper in the upper basket of the dish-
washer.
Using the appliance
1. Fit the ground coffee holder (6) and its
lid (7) in their correct positions. Check
that the assembly is correctly positio-
ned in the body (3).
2. Remove the lid (2) and put coffee
beans into the bean hopper (1). Do
not fill above the "max." level. Replace
the bean hopper lid and make certain
that it is correctly positioned.
3. Set the quantity of ground coffee you
want by positioning the number of
cups selector (8) according to the
desired quantity.
4. Set the ground coffee fineness by
adjusting the grind setting selector (9)
to the desired level (see § Practical
Hints)
5. Plug in.
6. Press the ON/OFF switch (4) to start
the appliance.
7. Once the selected quantity has been
milled, the appliance will stop automatically.
8. If you want to stop the appliance befo-
re then, press the ON/OFF switch (4).
9. Remove the ground coffee holder, tap
the receptacle gently, remove the lid
and pour the ground coffee obtained
directly into the filter of the coffee
maker or use a measuring spoon to fill
the Expresso coffee maker.
10. To obtain additional ground coffee,
you can repeat an operating cycle by
again pressing the ON/OFF switch
(4). Always ensure that the ground
coffee does not go above the "max."
level of the ground coffee holder (6).
Selected settings will be retained from
one use to the next.
Caution!
For your appliance to run correctly, make
certain that:
- The bean hopper lid (2) is correctly
positioned
- The ground coffee holder (6) and its lid
(7) are correctly placed in the body of
the appliance.
Practical hints
- Keep your coffee beans in the refrige-
rator in a sealed container.
- To keep your coffeeʼs entire aroma, we
advise you to grind your coffee just a
few moments before making it.
Grind setting advice
- Use the grind setting selector (9) to
adjust the level of fineness of your
ground coffee according to the type of
coffee maker you use and to your
taste.
- On first use, you are advised to select
an intermediate position according to
your type of coffee maker and then
later adjust the degree of fineness to
your taste. Once you have used the
appliance a few times, you will find the
ideal grind to suit you.
- Do not change the grind setting when
the mill is running.
28