Audio Recording - Wiseup W8100 Guia Del Usuario

All manuals and user guides at all-guides.com
3.2.2. Press the Power Button once to start video recording. The blue indicator light will
flash 3 times and turn off.
3.2.3. Press the Power Button once again to stop video recording. The blue indicator light
will come on and stay illuminated, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 5 minutes automatically.
2). The camera can record video for 100 minutes continuously on a full charge.
3). Each video clip takes up about 140MB storage space of the Micro SD card.
4). Video Resolution: 1920x1088, 1280x720P, 640x480 Optional Video Format: AVI
5). Loop recording is supported.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and green
indicator lights will be illuminated for 3 seconds and then the green one will turn off while the
blue one will stay illuminated, indicating the camera has entered into standby mode
automatically.
3.3.2. Press the Mode Button twice to enter into still photograph mode. Both green and blue
indicator lights will stay illuminated.
3.3.3. Press the Power Button once to take a photo. Every time you take a photo, both green
and blue indicator lights will flash once.

3.4. AUDIO RECORDING

3.4.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
green indicator lights will be illuminated for 3 seconds and then the green one will turn off
while the blue one will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.4.2. Press the Mode Button once to enter into audio recording mode. The blue indicator
light will turn off while the green indicator light will come on and remain solid.
3.4.3. Press the Power Button once to record audio only. The green indicator light will
flash 3 times and turn off.
3.4.4. Press the Power Button once again to stop audio recording. The green indicator
light will come on and remain solid.