Würth MLL08 Instrucciones Para El Manejo página 5

Use as Intended
The unit is intended for determining and checking pre-
cise horizontal and vertical partitions as well as 90° ar-
rangements and angles.
For damage caused by usage other then intended, the
user is responsible.
Product Specification
Line laser
Article number
Laser type
Laser class
Number of laser crosses
Laser cross on ceiling
Plumb point, downward
Number of laser lines
Visibility
Pulsing beam for operation
with hand receiver
Visual alarm when out of
levelling ADS
Thread for tripods
Power supply
Charge duration
Battery operating duration
Levelling range
Levelling time
Operating temperature, max.
Accuracy
Horizontal and vertical accuracy ± 3.0 mm on 30 m
Laser cross on ceiling
Plumb point, downward
90° angle
10
1 Carrying handle
2 Laser exit
3 Horizontal circle
4 Set-up legs
5 5/8"-11 tripod mount
6 Fine-adjustment knob
7 Release knob
8 Charge socket
9
MLL08
10 Button for vertical lines
0714 640 510
11 Button for hand-receiver mode
635 nm
12 Hand-receiver indicator
2 M
13 Battery indicator
4
14 Button for horizontal lines
yes
15 Charge indicator
yes
Not all of the accessories illustrated or described are included
5
as standard delivery.
up to 22 m (depen-
ding on ambient
light)
When the battery is almost empty, the battery indica-
up to 90 m reach
tor 13 lights up or the middle vertical line flashes in ma-
nual mode. Charge the installed battery. The charge du-
yes
ration is approx. 8 – 10 h.
5/8"-11
The charge indicator 15 flashes during the charge pro-
Lithium ion battery
cedure. When the battery is fully charged, the battery
indicator 15 lights up continuously.
8-10 h
approx. 20 h
±4°
≤ 30 s
Setting Up
45°C
Release the fold-out set-up legs 4 with release knob 7.
Switching On
Set up the machine level. Press the On/Off switch 9.
± 3.0 mm on 30 m
The tool automatically levels itself and the laser beams
± 6.4 mm on 30 m flash. The tool is not within the levelling range when the
laser beams continue to flash after 30 seconds.
± 30"
After levelling, the front horizontal line is visible (ap-
prox. 190°).
Unit Elements
On/Off switch
Charging the Battery
Starting Operation