Tabs
Clips
Apron Frame
Apron Panel
5. Prepare the Whirlpool
Remove the Apron Access Panel
Insert a flat-blade screwdriver or other prying tool into one of the screwdriver slots.
Use the screwdriver to pry the bottom clip out and release the clip.
Repeat this procedure at the remaining screwdriver slot.
When all bottom clips are released, pull the bottom of the panel away from the apron to release the
remaining clips.
When the bottom of the panel is clear, lower the panel until the top of the panel is clear.
Store the panel in a safe place.
1070292-2-J
10
Sterling