IKEA MOTSVARIG Manual Del Usuario página 20

OVEN CONTROLS
Setting the Clock
When the appliance is first plugged in or when the
power supply to the appliance has been interrupted,
the display will flash 12:00. It is recommended to
always set the clock for the correct time of day be-
fore using the appliance.
To set the clock:
1. Press clock once (do not hold clock key down).
2. Within 5 seconds, press and hold
until the correct time of day appears in the dis-
play
NOTE
The clock cannot be changed when the oven is set
for cooking or self clean is active
Temperature display
(Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahr-
enheit (°F) at the factory. The oven may be pro-
grammed for any temperature from 170°F to 550°F
(77°C to 288°C).
To change the temperature to Celsius (°C) or
from °C to °F:
1. Press broil. — — appears in the display.
2. Press and hold until HI appears in the display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press or to change °F to °C or °C to °F.
To accept the change, wait 6 seconds.
20
Changing between continuous bake or
12-hour energy saving feature
The oven control has a built-in 12-hour energy sav-
ing feature that will shut off the oven if the oven is
left on for more than 12 hours. The oven control can
be programmed to override this feature for continu-
ous baking.
To change the continuous bake setting:
1. Press and hold Timer On-Off for 6 seconds until
a tone sounds. — — hr will appear in the display
or
for continuous cooking. The current time of day
will return to the display.
2. To cancel the continuous bake setting, press
Timer On-Off and hold for 6 seconds until a
tone sounds. 12 hr will appear in display indicat-
ing that the control has returned to the 12-hour
energy saving feature.
IMpORTANT
Changing to continuous bake or 12 hour mode
does not change how the cooktop controls
operate
Setting a silent control panel
When selecting a function, an audible tone is heard
each time a key is pressed. If desired, the control
can be programmed for silent operation.
To set the controls for silent operation:
1. Press and hold Start Time for 6 seconds. The
control will beep once and release the key.
2. The controls are now set for silent operation.
To return to non-silent operation:
1. Press and hold Start Time again for 6 seconds
until the control beeps once and release the key.
2. The control is now set for audible operation.
EN