Assembly Instructions - SPORTSTECH CX608 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (10) in front of Main Frame (1) and align bolt holes. Attach the Front Stabilizer (10) onto
the front curve of the Main Frame (1) with two M10x57 Bolts (61), two Ø 10x Ø 20x1.5 PVC washer (62),two Ø10
Big Curve Washers (63)and two M10 Cap Nuts (64). Position the Rear Stabilizer (11) behind the Main Frame (1) and
align bolt holes.
Attach the Rear Stabilizer (11) onto the rear curve of the Main Frame (1) with two M10x57Bolts (61), two Ø 10x Ø
20x1.5 PVC washer (62), two Ø10 Big Curve Washers (63), and two M10 Cap Nuts (64).
69
67
61
1
62
10
63 64
64
63
62
11
61
25