Vortice VortDispenser PRO Manual De Instrucciones página 17

ENGLISH
2. Loosen the telescopic pole using the knob (1) and extend it (2). Tighten once you have reached
the desired height (3).
3. Mount the back plate on the support pole by inserting the M10x30 mm screw in the support
bracket and tighten with the allen key provided.
M10x20 mm
screw
(x1)
8 mm
4. Insert the two M4x16mm screws in the two holes on the back plate, fixing them in place with the
nuts but without screwing them down completely.
2
Loosen
1
Back
plate
3
Tighten
M4x16 mm screws
17