Tripp-Lite PDUV30HV Manual Del Propietário página 4

Features
IEC-60320-C13
IEC-60320-C19
18-11-318-933312.indb 4
Outlets: During normal operation, the outlets distribute AC power
to connected equipment.
Input Plug: The cord is permanently attached to the PDU and has
an IEC 309 16A plug.
Ammeter: The total electrical current used by the PDU will be
displayed on the digital meter in amperes.
PDUMVROTATEBRKT Mounting Accessory: Use these V-shaped
brackets to mount the PDU with its outlets facing the rear of the
rack.
Mounting Brackets: Use these brackets as an alternate PDU
mounting method.
Mounting Buttons: Come pre-installed on the back side of the
PDU and are used for toolless mounting. Note: Four additional
mounting buttons are included for alternate rack styles.
C14 Plug Sleeve: (Optional) Use the included C14 plastic sleeves
to secure plugs to receptacles. Attach the sleeve to the plug making
sure that the pull tabs remain outside the plug and that the fit is
secure. To unplug equipment properly, use the pull tabs to remove
the plug and sleeve from the receptacle.
C20 Plug Sleeve: (Optional) Use the included C20 plastic sleeves
to secure plugs to receptacles. Attach the sleeve to the plug making
sure that the pull tabs remain outside the plug and that the fit is
secure. To unplug equipment properly, use the pull tabs to remove
the plug and sleeve from the receptacle.
4
3/20/2019 1:22:53 PM