External Power Supply - DJI CINESSD STATION UG2 Guia De Inicio Rapido

No additional software is required for exporting data from the CINESSD. You
may also use the following DJI software based on your system.
Windows: DJI Camera Exporter.
• Mac: DJI CINELIGHT
DO NOT remove the CINESSD when it is powered on.
The station can be connected to a USB 2.0 port. However, an external
power supply may be required.
Insert the CINESSD before connecting the station to the computer.
The station icon will vary based on your computer operating system.
Plug the cable in securely to ensure USB 3.0 transfer speeds.
If transfer speeds are slow, check that USB 3.0 mode is active.
Deleting Files
To guarantee the high performance of the CINESSD, the station only supports file exporting.
To delete files, please insert the CINESSD into the aircraft and launch DJI GO
format the CINESSD to free up storage space.
Ensure to back up files before formatting the CINESSD.

External Power Supply

Use an external power supply when the computer is not able to detect the CINESSD or
the file export is unstable. Connect the station to an external power supply as follows.
4
TM .
3
TM 4 app to
1
2