Manual Mode - BH FITNESS G6310 Manual Del Usuario

MONITOR ELEMENTS
A: In SCAN mode this monitor
simultaneously
Speed; Distance; Calories and Pulse
rate.
The electronic monitor has 9 push-
buttons or keys.
B: START/STOP.
C: Quick access push-buttons or keys
for speed settings (3 – 6 – 9 - 12).
D: SPEED ( - + ).
E: VOLUME ( - + )
Safety key.
g:
STARTING
Plug the unit into a wall socket with an
EARTH terminal and set switch (L) to
position (1). Fig (1) The safety key (g)
must be slotted into its housing. The
safety key must be inserted into its
housing, otherwise the machine will
not operate.
English
displays: Time;
With the display showing the -----
symbols, when the safety key is
inserted into its slot the machine will
beep and the display will state that the
machine is READY.
OPERATING INSTRUCTIONS

MANUAL MODE

With the machine in READY status,
press the START / STOP key and the
machine will start, after a 3 second
countdown shown on the display (A),
at a speed of 1.0 km/h. The SCAN
function will
following values: Time; Calories; Pulse
rate; Speed and Distance.
You can increase or decrease the
speed setting in MANUAL mode by
pressing the (+ -) keys, between 1.0 –
15 km/h, you can also increase or
decrease the
pressing the quick access keys, the
said keys correspond to values of 3 –
6 – 9 - 12 km/h.
The machine will stop if you press the
STOP / START key or if you remove
the SAFETY KEY(g).
6
rotate through
speed setting
the
by