Adjusting The Handle Position; Fitting The Hood - Ickle Bubba Astral Manual Del Usuario

To adjust the position of the handle, press the grey buttons on
both sides of the handle. There are 4 possible positions, as seen
below:
1
1. To be used when installing in the car
2. To be used when carrying the car seat by hand
3. To be used when placing the child in or out of the infant car seat
4. To be used when placing the child in or out of the infant car seat
When the handle is adjusted to the desired position, ensure that it
is locked in place. When locked, the grey button will pop up
automatically and you will hear a clear "click" sound.
1.
Place the hood around the handle and secure in position
using the two zips on either side
2.
Pull the elasticated edge of the hood so that it is positioned
behind the headrest

Adjusting the Handle Position

2

Fitting the Hood

V.01.21
3 4
11