Ant+ Connectivity - Orbea BLUE PAPER VIBE 2021 Manual Del Usuario

68 | ORBEA
MA H L E EB I K E MOT I ON
X3 5 SYSTE M
ANT + C O N NE CT I VI TY
From Model Year 2020, all Orbea ebikes equipped with a
MAHLE Ebikemotion® X35 system do have ANT+ connec-
tivity from the factory, which allows for the visualization
of the X35 system data on compatible head units, such
as the OC ANT+ LEV display, amongst other units in the
market.
The X35 system uses the ANT+ protocol to communicate
to compatible head units real-time data of the system. The
ANT+ communication occurs from the internal battery to
the head unit, it is not possible to control the system using
ANT+ accesories. The protocol by which certain accesories
can change parameters of the system, such us the Mahle
Ebikemotion mobile apps or a heart rate monitor, must be
Bluetooth 4.0 or later versions.
COMPATIBLE HEAD UNITS
The X35 system uses the ANT+ LEV protocol.
The head unit to be connected to the X35 system for the
display of the system data must be compatible with this
data transmission protocol. Not all ANT+ units on the mar-
ket are necessarily compatible with the LEV protocol.
The OC ANT+ LEV display unit is fully compatible with
the ANT+ LEV protocol and allows for the visualization of the
following X35 system data:
· Current speed.
· Internal X35 battery charge level.
· Total system odometry.
· Current assist level.
· System errors.
The OC ANT+ LEV display unit also allows for the assist
levels to be changed from the unit itself.
manual from our website.
TECHNICAL MANUAL
available on other ANT+ LEV units in the mar-
ket will depend on the characteristics of the
connected head unit. Consult with the com-
patible head unit manufacturer.
You can access the list of ANT+ LEV compatible head
units here:
www.thisisant.com/directory
complete list of the compatible devices
X35 ERRORS DISPLAY
Through the ANT+ LEV connection, errors on the MAHLE
Ebikemotion® X35 system can be displayed on the com-
patible head units. If the system has recovered from a
previous error, this can also be displayed in the head unit.
· ERRORS IN THE X35 SYSTEM: If there is an error code in
the system, this will be shown in the head unit by the ge-
neric error code E255. All system error codes (regardless
the code E255 in the head unit. Connect the X35 system
to the MAHLE Ebikemotion® X35 mobile apps (User or
and the diagnostics/repair method.
· ERROR RECOVERY VISUALIZATION: If the system has
recovered from an error, this will be shown in the com-
patible head unit by the generic code E000 when the
system is switched on and paired with the display. The
E000 code will disappear after a few seconds. The sys-
tem has no errors.
BLUE PAPER VIBE · 2021
1 4 L IG H TS
LIGHTS SPECIFICATIONS
cations for the system when connecting
lights to the X35 system. Connecting lights
of greater output may make the system to
give out an illumination error.
RUNNING LIGHTS
FRONT ORBEA OC
Integrated in headset cover
REAR LEZYNE REAR STVZO EBIKE
(Seatpost or mudguard
mounting options)
The lights on Vibe, both the headset cover integrated front light and the seatpost or mudguard mounted
rear lights, are programmed as running lights, so they will turn on automatically when the bicycle is
switched on and will turn off when the bicycle is switched off. Once the bicycle has been turned on, the
lights can be switched off using the Iwoc One following the method described in the X35 operation section
of this manual. However, if the user prefers the lights not to turn on upon turning on the bicycle, this be-
FRONT LIGHT (OPTION)
LEZYNE POWER
STVZO PRO E115
MAXIMUM LIGHTS SPECIFICATIONS:
-
· 6V
· 6.6W
· 1100mA
Luminosity: 60 lumen
Input voltage 6-12V DC
On/Off: Iwoc Trio
Connection: Mahle lights cable (bare cable)
Luminosity: 30 lumen / 11 lux
Output: 1.25W
Input voltage: 6-12V DC 2 LED
2 LED
Cable lenght: 135 cm
On/Off: Iwoc Trio
Connection: Mahle lights cable
· Seatpost: JST connector. 2 pins
· Mudguard:Bare cable. Crimped
Luminosity: 310 lumen / 115 lux
Power: 6 W
Input voltage 6-12V DC
1 LED
Cable lenght: 130 cm
On/Off: Handlebar Lezyne remote switch
Connection: Mahle lights cable (JST connector. 2 pins)
ORBEA | 69
EN