Basic Operation - Multilaser explorer Manual Del Usuario

Basic operation

Initial system starts up
Operating the unit for the first time or after replacing the car battery, Press RESET button with a pointed object (such as ballpoint) to set
the unit to initial procedure.
NOTE: When some errors occur in the LCD display, you can also press RESET button to resume to normal. And it will erase the clock
setting and some memorized functions.
Turning the Unit ON/OFF
Press POWER button to turn on the unit. When the unit is on:
• Short press POWER button, turn off the monitor, press POWER button again to turn on the monitor.
• Long press POWER button to turn off the unit.
Volume control
Press VOLUME +/- button for increase or decrease the sound volume.
Mute Function
Press MUTE button shortly to cut down the sound output, and "MUTE" icon appear in the LCD display. Press it again to restore previous
volume level.
Touch screen calibrate
If the position of touch occurs warp, you can calibrate by pressing the the "+" cursor. Access the touch screen calibrate mode interfa-
ce. Click the icon to access the touch screen calibrate mode interface; Long Press the remote control to access the "6" Setting on the
mode interface.
Aim at the "+" and click it, the symbol will moves around the touch screen, click it six times, system will finish calibration automatically
and exit calibration mode.
If the calibration setting has been finsished,the , the interface will pop up. Otherwise system need calibrate renewedly.
Upward slide
Downward slide
multilaser
www. .com.br
33