Cleaning And Care; Hints On Disposal; Declaration Of Conformity - oneConcept 10026453 Manual Del Usuario

• Please pull the plug out of the socket (don't touch the socket when your hands are wet) and
put it at the correct position.
• After discharging the water in the tub,please move the switch from discharge to standard.
• Clean the de-hair device: Take out the de-hair set,dismantle it with a fi nger pressing the inside
bottom. Put the de-hair set in water to clwan. After clwaning,restore the de-hair device,insert
it into the slat wnder the water level side board. A click should be heard.
• Pick up the water introducing tube and hang the discharging tube.
• Clean the housing of the machine, wipe it thoroughly,and wipr out the dirt with
chemicals,such as alcohol, eradicator,acetone,gas.etc.When it is very dirty,please use
neutralliquid soap to clean.
• Close the lid, placed the machine at the ventilation in the room.
Inportant Hints on Cleaning
• Water is not allowed to enter the inner part of the machine directly. Otherwise, the electric
motor will be conducted by electricity. This is the real reason why sometimes that electric
shock may happen.
• If the suply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualifi ed persons in order to avoid a hazard.

Cleaning and Care

Hints on Disposal

According to the European waste regulation 2002/96/EC this symbol
on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the ap-
propriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate was-
te handling of this product. For more detailled information about recyc-
ling of this product, please contact your local council or your household
waste disposial service.

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
7