B&W 2 Serie Manual Del Usuario página 19

Frequency range
Frequency response
Harmonic distortion
Nominal impedance
Crossover frequencies
Passive power handling
Max. recommended
speaker cable impedance
B&W Loudspeakers Ltd reserves the right to amend details of the specification without notice in line with technical developments.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX, England. Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
DM 605 S2
™
Description 3-way vented-box system with active bass
Drive units 2x 180mm (7in) paper/Kevlar
1x 180mm (7in) woven Kevlar
1x 26mm (1in) metal cone high-frequency
-6dB at 23Hz (adjustable) and 30kHz
25Hz (adjustable) – 20kHz ±3dB on reference axis
Dispersion Within 2dB of response on reference axis
Horizontal: over 40° arc
Vertical: over 10° arc
Sensitivity 91dB spl (2.83V, 1m)
2nd & 3rd harmonics
<1% 42Hz – 20kHz (90dB spl, 1m)
8Ω (minimum 3Ω)
230Hz, 4kHz
25W-200W continuous into 8Ω on unclipped programme
0.1Ω
Amplifier Power output:
Input impedance:
Signal/noise:
Functions:
Inputs:
Outputs:
Dimensions Height:
Width:
Depth:
Net weight 31kg (68.2 lb)
Kevlar is a registered trademark of DuPont.
Copyright © B&W Loudspeakers Ltd. Printed in England.
http://www.bwspeakers.com
® cone bass
® cone midrange
130W continuous
100kΩ
91dB
Bass level
Bass equalisation
LFE phase 0°/180°
Auto-sensing standby/on
Speaker level (binding posts)
LFE (RCA Phono)
LFE link to 2nd unit (RCA Phono)
996mm (39.2 in)
236mm (9.3 in)
440mm (17.3 in)