Festo CDVI5.0 Serie Breve Descripción página 10

2 Pin assignment of the multipin plug
For controlling the valves, each valve coil is assigned to a
certain pin of the multipin plug. A valve location always
occupies two addresses. Unused valve coils or locations
(e.g. if single-solenoid valves or reserve plates are used)
also occupy addresses. The multipin plug is fitted in the
left-hand end plate at the factory.
Caution
The components of the valve terminal contain electros-
tatically sensitive elements. The components will be
damaged if you touch the contact surfaces of the plug
connectors and if you do not observe the regulations
for handling electrostatically sensitive components.
10 Festo P.BE-K-CDVI 0106NH English