Descargar Imprimir esta página

Whittier Wood Products 273W Instrucciones Para Armar

Despensa del mayordomo

Publicidad

Enlaces rápidos

Model #
273W
Butler's Pantry
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 01/06

Publicidad

loading

Resumen de contenidos para Whittier Wood Products 273W

  • Página 1 Model # 273W Butler’s Pantry Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 273W Butler’s Pantry – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. C — Center/Bottom Shelf — Qty. 2 A — Left Side B — Right Side Panel — Qty. 1 Panel —...
  • Página 3 273W Butler’s Pantry – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. G — Drawer Face — Qty. 1 H — Top — Qty. 1 I — Drawer Slide Rail — Qty. 2 J —...
  • Página 4 273W Butler’s Pantry – Parts List (cont.) O — #7x1½" Pan Head W — #8x1" Machine Screw ZE — Pad — Qty. 2 Type 17 Screw — Qty. 8 — Qty. 2 ZF — #8x7/8" LoProfi le P — #6x¾" P.O. Zinc X —...
  • Página 5 READ CAM-LOCK INSTRUCTIONS AT THIS TIME. STAIN TEST AREA STAIN TEST AREA FIG. 1 1. Install Cam Connectors (R): four in Left Side (A) four in Right Side (B) fourteen in Face Frame (D) four in Top (H) 273W — PAGE 5...
  • Página 6 Black Screws (V) attach the Drawer Slide Rail (I) in the predrilled holes beneath the Center Shelf. Repeat for Right Side (B). FIG. 3 3. Attach the Face Frame (D) to the front of the Left and Right sides using Cam Housings (Q). PAGE 6 — 273W...
  • Página 7 Drawer Stop and fasten the screw into the bottom edge of the Center Shelf so it is up against the Face Frame. The long end of the Drawer Stop may be pressed down to install or remove the drawer. 273W — PAGE 7...
  • Página 8 fi rmly tap all the way into the hole in the bottom edge near the front of both side panels. Rotate the Adjustable Glides to level the unit. Hammer Tack Glides (ZD) to bottom of Left and Right Sides 1" from back edge. PAGE 8 — 273W...
  • Página 9 9. Attach the Drawer Face (G), to the Drawer False Front (M). Insert two #8x1½" Machine Screws (X) through the center holes in the drawer false front and drawer face and loosely fasten two 1¼" Wood Knobs (Y). DO NOT INSERT SCREWS (ZF) AT THIS TIME. 273W — PAGE 9...
  • Página 10 Line up the screw holes in the Hinge with the predrilled holes in the door and insert two #6x3/4" P.O. Zinc Screws (P). Attach the Wooden Knob (Y) to the Door with a #8x1" Machine Screw (W). PAGE 10 — 273W...
  • Página 11 Tighten the screw marked “2” in FIGURE 13A to fasten Hinge. The Doors may need to be adjusted so all the spaces between the doors and unit sides are equal. Follow the instructions in FIGURE 13A. 273W — PAGE 11...
  • Página 12 Antique Brass Pan Head Screw (ZC) through the Turn Latch and a #8 Washer (ZK) into the Face Frame. See FIGURE 15. Repeat steps for lower door. 16) When you have determined the location for your unit, install the Furniture Tipping Restraint (ZL). Carefully follow the instructions on the package. PAGE 12 — 273W...
  • Página 13 Modelo # 273W Despensa del mayordomo Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se Instrucciones para Armar dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 14 Leva (Q). catorce en el Marco Frontal (D) cuatro en el Panel Superior (H) Fije el Marco Frontal (D) en el frente de los Paneles Laterales Izquierdo y Derecho utilizando Tuercas de Sujeción para Leva (Q). 273W — PAGE 2 SP...
  • Página 15 Accesorio de Seguridad que Evita Fije el Tirador de Madera (Y) a la puerta con un Tornillo que el Mueble se Volquee (ZL). Con cuidado siga las para Metal #8x1" (W). instrucciones que vienen en el paquete. 273W — PAGE 3 SP...
  • Página 16 No. de modèle 273W Placard à provisions Politique de service : Nous remplacerons toutes Instructions de Montage les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 17 4) Fixez l’encadrement de la face (D) sur l’avant des côtés quatre dans le dessus (H) gauche et droit au moyen des boîtiers de cames (Q). 2) Fixez les étagères centrales/inférieures (C) sur le côté FIG. 5 — Bottom View = Vue inférieure 273W — PAGE 2 FR...
  • Página 18 (S) et de la plaque de fi xation (U). Vous pouvez monter les portes d’un côté ou de l’autre. 273W — PAGE 3 FR...