Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly Instructions
226W
Standard
3-Shelf
Hutch
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
225W
Standard
2-Shelf
Hutch
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
4/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products 225W

  • Página 1 Service Policy: We will replace any parts which are defective, missing or Hutch damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 225W Standard 2-Shelf Hutch & 226W Standard 3-Shelf Hutch – Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. QTY. QTY. ID Description 225W 226W ID Description 225W 226W F Back Support .
  • Página 3: Tools Required

    Alder pieces – apply stain to back of Crown. See FIGURE 2. 226W Standard 3-Shelf Hutch shown in all FIG. 1 drawings. 1. Lay out the wood parts in their approximate locations to aid in the identification and assembly. 225W/226W — Page 3...
  • Página 4 Important: If you have chosen to For 225W & 226W combine door kits as shown in the chart below, you must locate the Rafix Bolts two holes up from the •...
  • Página 5 Right Side Panel (C). Unfold the Back (G) and attach to the unit using Screws (K). Make sure the top edge of the back is flush with the top edge of top shelf and equal distance from the sides. 225W/226W — Page 5...
  • Página 6 7. Stand the unit upright. Determine where you want to locate the Adjustable Shelves (H). There is one Adjustable Shelf for the 225W and two Adjustable Shelves for the 226W. Tap the Shelf Brackets (M) into the holes with the flat side down. See Figure 7A. Insert the shelf as shown.
  • Página 7 Instrucciones para Armar 225W Unidad de Normas para obtener servicio: 2 Estantes Reemplaza- remos las piezas que tengan defectos, falten o se Tamaño dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Estándar Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 8: Lista De Piezas

    225W Unidad de 2 Estantes Tamaño Estándar y 226W Unidad de 3 Estantes Tamaño Estándar Lista de piezas ANTES DE ENSAMBLAR, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación.
  • Página 9 7. Coloque el mueble de pie. Determine dónde desea posterior inferior y dos en la posición donde desee colocar los Estantes Ajustables (H). El 225W tiene colocar el estante más bajo. Importante: Si va a un Estante Ajustable y el 226W tiene dos Estantes instalar los juegos de puertas en las combinaciones Ajustables.
  • Página 10 Instructions de Montage 225W Huche Politique de service : Nous remplacerons toutes Standard à les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter 2 Étagères directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 11: Outils Nécessaires

    225W Huche Standard à 2 Étagères et 226W Huche Standard à 3 Étagères Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités de pièces reçues correspondent à celles de la nomenclature des pièces figurant ci-dessous. Qté Qté...
  • Página 12 Rafix deux trous à partir hauteur désirée des étagères réglables (H). Il y a du bas afin de positionner correctement l’étagère une étagère réglable pour 225W et deux étagères inférieure. Voir la FIGURE 2. Pour toutes les réglables pour 226W. Enfoncez les supports autres combinaisons, vous pouvez placer l’étagère...
  • Página 13 NOTE: If planning to attach the 225W or 226W hutches to either the 223W or 224W bases, please read the following. There are two methods for attaching the hutch. 223W Base Top 224W Base Top 225W Hutch FIG. 10 METHOD 1: To remove the top from the Base unit: Remove the screws that attach the Backs to the Top.
  • Página 14 NOTA: Si va a instalar las unidades de estantes 225W o 226W en las bases 223W o 224W, por favor lea la información siguiente. La unidad de estantes se puede fijar de dos maneras. MÉTODO 1: Quite el panel superior de la Base: Saque los tornillos que fijan los Paneles Posteriores al Panel Superior.

Este manual también es adecuado para:

226w

Tabla de contenido