Uline BROTHER P-TOUCH D400AD Manual Del Usuario página 9

WHEN AN ERROR MESSAGE APPEARS ON THE DISPLAY
When an error message appears on the display, follow the directions provided below.
MESSAGE
Check # of Digits
Entered!
Cutter Error!
Length Limit!
Text Too High!
Text Too Long!
System Error XX
PAGE 9 OF 27
TROUBLESHOOTING CONTINUED
The number of digits entered in the bar code data does not match
the number of digits set in the bar code parameters.
The tape cutter has been closed when user tried to print or feed tape.
Turn the printer off and then on again before continuing. The tape is
tangled in the cutter, remove the tape.
The length of the label to be printed using the text entered is longer
than 39.97" (1 m). Edit the text so that the length of the label is less
than 39.97" (1 m).
The text size is too large.
The length of the label to be printed using the text entered is longer
than the length setting.
Contact Uline Customer Service at 1-800-295-5510.
1-800-295-5510
uline.com
CAUSE/REMEDY
0721 IH-5135