Skil 2354 Instrucciones De Funcionamiento Y Seguridad página 21

SM 1619X09152 06-14_2354 USB 6/3/14 10:15 AM Pag
green indicator light depicting a forward arrow
will light up.
For reverse rotation move the lever to the far
right and the green indicator light depicting a
reverse arrow will light up.
To stop in either direction just release the
trigger. To activate trigger lock move lever to
the center off position (Fig. 1).
UTOLOCK™
Your tool is equipped with an automatic locking
system. This feature will lock the bit holder in
one position when the trigger switch is
released. This will allow you to tighten or loosen
a nut or screw by rotating the tool by hand with
the switch off. This is convenient when higher
turning torque is needed.
SITE-LIGHT™
Your tool is also equipped with a light that turns
on automatically when the switch is
activated for better visibility during operation
(Fig. 1). The Site-Light™ is maintenance free
and was designed to last the life of your tool.
CH RGING THE TOOL
Using charger 2610033525: Insert USB cable
plug into USB port on charger. Plug charger into
your standard power outlet, then plug micro
USB plug into tool. (Fig. 2)
Using USB cable: Plug USB plug into USB port
on computer then plug micro USB plug into
tool. (Fig. 2)
The green charging indicator light on the tool
will turn "ON". This indicates that the battery is
21