Ups Installation; Lbs Settings - Tripp-Lite SmartOnline S3M Manual Del Propietário

3. Installation and Wiring

3.14.3 UPS installation

The complete system is shown below.
MASTER
SLAVE

3.14.4 LBS Settings

Turn off inverter, then turn on the LCD of the UPS.
Homepage Setting >> Advanced Setting >> Password "191210" >> System Setup
LBS mode: Setting value: LBS Disable, LBS Master, LBS Slave. The default is LBS Disable.
a. Single UPS LBS system – Set one UPS to LBS Mode LBS Master; set one UPS to LBS Mode, LBS Slave.
b. Parallel UPS systems – Set one parallel UPS system to LBS Mode LBS Master; set one parallel UPS system to LBS
Mode, LBS Slave.
Input
LBS Connecting Cable
Input
Output
Output
37
Load