cecotec POWERACTIVE Manual De Instrucciones página 14

ENGLISH
NOTE: the marks "L" and "R" can also be found in the crank. Please install the pedals accordingly.
4. Fix the handlebar to its support with the cylinder head screws and Ф6 washers.
5. 1. Slide the monitor onto the grooves you can find on its support.
2.Connect the cables to the sockets "sensor" and "pulse".
3.Keep all the cables inside the corrugated pipe.
6. Loosen the seat-adjusting knob (A) and the heigh-adjusting knob (B) to adjust the position
of the seat. Fasten the knobs to fix the seat in the desired position.
POWERACTIVE
14