CycleOps PRO 300PT Manual De La Consola página 16

A
VERAGE
WATTS AVG 2
SPEED AVG 3
CADENCE AVG 5
HEART AVG REGULAR
TORQUE AVG 1
RESET
RETURN
MODE
SELECT
Setup (Averages) 4
6) Repeat steps 3, 4, and 5 for [SPEED AVG]
and [CADENCE AVG]. Press [SELECT] to
accept changes and reenter scrolling
menu.
7) Press [DOWN ARROW] to scroll to [HEART
AVG] and press [SELECT].
8) Press [UP ARROW] or [DOWN ARROW] to
toggle between [FAST], [SLOW], and [REGU-
LAR] averaging. Press [SELECT] to accept
changes and reenter scrolling menu.
Selecting a slower rate of display it allows
for better pacing during a time trial effort
by allowing for a slower update of the dis-
play.
9) Press [SELECT] to enter [TORQUE AVG].
Press [UP ARROW] or [DOWN ARROW] to
determine the number of previous data
points used (1, 2, 3, 5, 10, 30) to determine
the average. Press [SELECT] to accept
changes and reenter the scrolling menu.
Selecting a higher number of previous data
points used allows for better pacing during
a time trial effort by allowing for a slower
update of the display.
10) To reset user settings press [DOWN
ARROW] to scroll to [RESET] and press
[SELECT].
11) To begin a ride, press [DOWN ARROW]
to scroll to [RETURN] and press [SELECT].
Press [DOWN ARROW] to scroll to [RETURN]
and press [SELECT].
16