Clear Memory; Test Information (Current Firmware Version, Lcd, Backlight, Hub Heart Wheel, Torque, Data Ride And Data Test) - CycleOps PRO 300PT Manual De La Consola

Clear Memory

There are two methods to clear memory.
When the memory clear is complete, the
console will return to dashboard display.
CLEAR MEMORY
EXECUTE CLEAR
RETURN
MODE
SELECT
Clear Memory
Option 1-
1) In dashboard display press and hold
both [MODE] and [SELECT] for three (3)
seconds until clear appears and release to
execute clear.
Option 2-
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to [CLEAR MEMORY] and
press [SELECT] to execute clear.
2) Press [SELECT] to execute memory clear.
Test Information (Current Firmware Version, LCD,
Backlight, Hub Heart Wheel, Torque, Data Ride and
Data Test)
These tests only need to be performed when instructed by customer support staff. For questions
please contact Saris Cycling Group at 1-800-783-7257 (001 608 274 6550 international).
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
MODE
Test Information
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to through to [TEST] and
press [SELECT].
2) Press [SELECT] and current firmware ver-
sion information is listed. For updates
please visit www.cycleops.com or contact
Saris Cycling Group 1-800-783-7257 (001
608 274 6550 international).
SELECT
3) Press [SELECT] to reenter [TEST] mode.
Press [DOWN ARROW] and press [SELECT].
4) Press [DOWN ARROW] to scroll to [LCD
TEST] and press [SELECT].
5) Press [SELECT] to end test.
6) Repeat steps 4 and 5 [BACKLIGHT], [HUB
HEART WHEEL], [TORQUE], [DATA RIDE], and
[DATA TEST].
7) Press [DOWN ARROW] to scroll to
[RETURN] and press [SELECT] to return to
[MAIN MENU].
ABOUT
SARIS CYCLING GROUP
VERSION 01:13
800-783-7257
MODE
SELECT
About
21