Zero Torque - CycleOps PRO 300PT Manual De La Consola

Console to bracket
To connect the console to the bracket, slide the console down onto the bracket. Be sure to slide the console completely down onto the bracket to ensure
a solid connection between the console and the bracket. Make sure the contact points between the console and bracket remain clean and free from
moisture or debris.
IMPORTANT! How To Zero Torque
The torque must be zeroed to ensure that the PowerTap displays the most accurate power information. If the instantaneous power is positive, or nega-
tive, the torque needs to be zeroed. These operations must be done with NO tension on the chain or while stationary with NO force being placed on the
pedals. Also, the transmission icon must be illuminated.
To zero torque first ensure the transmission icon is showing then press [DOWN ARROW] to move the cursor to [WATTS]. Press [SELECT] to change to
[INCH-LBS]. Then hold down [SELCT] again until "0" is shown. Press [SELECT] to return to [WATTS]. The torque value will now read zero.
6
Batteries
The console ships with batteries. In the event the batteries need to be replaced over time, follow these simple
steps:
1. Remove the back cover with a small philips head screwdriver
2. Remove batteries
3. Replace with fresh AA batteries, paying attention to properly line up the poles
4. Replace battery door and secure with small philips head screwdriver