Confi uration of t e e C
Configuring hygiene functions
hen programming the eSCHELL
accepted rules of technology (AaRdT) are to be adhered to.
The hygiene functions are configured under the Hygiene menu item.
Here, the stagnation ushes and thermal disinfections have to be adapted to
the respective drin ing
The procedure for setting both functions is similar and involves three steps:
1. Selecting subscribers (fittings/groups)
2. Configuring hygiene function
3. Saving hygiene function
The configured stagnation ushes are carried out automatically. Thermal dis-
infections and cleaning stops are triggered under the Manual Operation
menu item or the programmed input.
Path: Hygiene — Stagnation Flush — Create Ne
»
First select the subscribers (individual fittings or a group) for the relevant
stagnation ush and accept the selection.
»
Give the stagnation ush a name and accept the selection using the Ap-
ply button.
»
Configure the automation according to the specifications of your drin ing
tion parameters.
156
LL
ater mana ement server
Confi urin
y iene functions
Notes on t e confi uration of y iene functions
C an in creatin ne
ater installation. In doing so, observe the follo ing notes on configura-
ater management system, the generally
ater installation via appropriate parameters.
sta nation us
Fig 17: Selecting subscribers